Looking for a mold for a console or someone who could build
 

I am in the process of building a 68 23' potter hull and all I'm in search of is s console.

36w X 48L and if there is a seat it needs to be a min of 15" from the deck. Preferably with a flange.

Any info or direction is greatly appreciated.

Thank you in advance.

Hate to bust your bubble...
There was "NO" 1968 23ft Potter....
Potter did not take over until 1970/71

To my knowledge "NO" 23's were built by Moesly...

I haven the original small console out of my 1974 23 Potter cc here in NJ.. It needs to be redone but up for grabs...

Thanks,
Patrick

Your forgetting about one...


Only one I know of would be the 23' sidvad that was prototype race hull that latter on the design was scaled down to 21' for the original 21' built hulls in the 60's

The production potter 23's were started being built in 71 maybe and labeled as 72 production year as the first of the famous potter built 23'

If you do happen to have a large hull built by sea craft and it is a true 68" I would like to buy it cause it would most likely be a 21'. If it is a true potter 23' then she is a 72' latter year model.

Far as console, I have a few. A friend of mine has many molds to make new ones as well. Where are you located?

The original 20' master angler console is what you want.

I have one of those I would sale if interested. It is much narrower...

If Slinger doesn't want it, shoot me a pm. I may be interested for my 20.