http://www.thehulltruth.com/attachments/boating-outdoor-photos/140855d1289911431-lets
 

Shine here is how my bow rails.want to cut it down so the front is 4 inch from deck how much to cut off rails?http://www.thehulltruth.com/attachme...lcraft-013.jpg

Bow rail
 

joel had a hard time trying to get a pic of boat to load,but finaley did. I want to lower my bow rail not change the angle. I want the front of the rail to be 4 inch off the deck. The front two rails are 12 inches tall. The rear are 9 or 9 1/2 inch tall. The question is how much do i need to cut off the rails. I think you would cut 6 inch off the front ones but how much would you cut off the rear ones? If i did this would it move the ends toward the rear ? Then cut those to fit back in the holders? Any insite welcome thanks in advance

Im not sure that will work with the angles you have, without bending the rail.