New Member/Owner with a "Barn-Find"
 

I found this hull last week and I could not help but see a terrific looking boat wanting to emerge.

I personally do not have any history with these boats and need some help in identifying the year range. The Hull ID# was glassed over by a prior owner in a gunnel cap project. The title says 1978, but it also said Searay instead of SeaCraft (I got that fixed at the tag office yesterday).

There are some interior design features that I have not seen on any of the other 1978 pictures that are posted on the interweb. The front deck storage configuration is a different size and design than others I have seen. Also the port and starboard interior bow have these storage shelves with small teak trim piece that seem unique. The aft utility boxes also seem different from other SeaCrafts. The boat measures 20'6" at the centerline.

I am about to start the restoration process this month. She is gonna get a new transom, fuel tank, console, four stroke motor, electrical, Leaning Post, T-Top, and paint inside and out.

I am looking forward to hearing from the SeaCraft enthusiast on this forum any insight they may have about this boat.

[IMG]http://i8.photobucket.com/albums/a45...201_100231.jpg[/IMG]

http://i8.photobucket.com/albums/a45...201_100246.jpg

http://i8.photobucket.com/albums/a45...201_100301.jpg

http://i8.photobucket.com/albums/a45...201_100301.jpg

http://i8.photobucket.com/albums/a45...201_100307.jpg

http://i8.photobucket.com/albums/a45...201_100311.jpg

http://i8.photobucket.com/albums/a45...201_100324.jpg

http://i8.photobucket.com/albums/a45...201_100336.jpg

http://i8.photobucket.com/albums/a45...201_100354.jpg

Welcome to the best forum on the internet. Don't forget that when adding a 4 stroke that Seacraft boats were designed to have a motor on them that was no more than 350 lbs or so. If you want to add a heavier motor then you have to add a bracket. Everyone wants to hang the biggest motor possible, but I believe a 20 or 18 Seacarft will perform just fine with a 90 HP motor. As far as your boat, I have not seen one quite like that, but I will await the Seacraft experts to respond. Either way welcome aboard!

Welcome to CSC but unfortunately your hull is NOT A SEACRAFT.
Use the search function to view the config of a Variable Dead Rise hull to yours.

btw Randy, you have a knack for refurbishing boats, love what you did with the Key West boat on your previous project.

Thank you Tom. The Key West turned out well.

Capt Chuck...Not a SeaCraft? Any suggestions on what it is? There are so many similar features & lines to the SeaCraft, I was almost certain of it...back to the interweb.

Your hull I'd might be glassed over but your HIN would be listed on the title. It would start with "SEC" if it's a SeaCraft. Looking at the transom picture that hull is not a VDH.

looking at the boxes in the back and the shape I would look at Offshore hulls... Offshore being the brand name...

nope... not an offshore .. Next guess would be a concept ...

Looks like a Barcone

Try looking up Continental Barcone

Built by Barry Barcone I think. They are nice boats. Lots of foam under that deck though. If the console is glassed to the deck that will be a sign.

I agree with Continental Barcone, from the picture I found in this forum at the start of this thread: http://www.classicseacraft.com/commu...ad.php?t=24166