|
AutoCAD 23' CC
Does anyone have an autocad file of the 23' CC?
|
Quote:
Jon Brush Boston, MA |
2 Attachment(s)
I have a complete 23 Sceptre I/O model in Solidworks that I will give to anyone that wants it. It is pretty big though since it has the engine and Bravo 1X drive models in it too - probably close to 150 Mb. The Solidworks file for the bare hull is 8Mb. Here is a .jpg of it. I built everything in the model pretty much like the boat was built; hull, liner, cap etc. and assembled the components into a Solidworks Assembly. It isn't perfect and there are some small dimensional errors but I think it is surprisingly close given that I have not completely disassembled my 23 for measurements. It would have been a whole lot better if I had used a laser scanner though!!! I can save Solidworks files into other formats like .STEP if that can be imported into AutoCad.
Attachment 14310 And here is the whole thing... Attachment 14311 |
wow...cool
|
nice stuff right there
|
| All times are GMT -4. The time now is 05:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft