Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   Liner in bow of sceptre. Drainage question (http://www.classicseacraft.com/community/showthread.php?t=29293)

dginge 04-01-2018 12:18 AM

Liner in bow of sceptre. Drainage question
 
4 Attachment(s)
Hello
Was hoping to get some help from some of the experienced sceptre guys. I have finally found drain cups (eBay) for my Attwood pop up cleats. I want to route the water with the 3/8 inch hose it comes with into bilge. Question is if I pop a hole just under the cleat on the liner where will that water go? Will it channel somewhere bad or will it catch a stringer and go to a limber hole? Thanks so much
David

dginge 04-01-2018 10:01 AM

My fear would be if the floor meets the liner below and the water channeled to the helm. My original thought was just to drop a line in the liner and it would just go straight to the bilge
Any help from you demolition, previous restore guys is appreciated

kmoose 04-01-2018 07:29 PM

Ehhhh, that’s a tough one. I don’t think there is a path unless you can fish a tube down to the area under the front locker.

dginge 04-01-2018 10:24 PM

Ouch. Yea that was a fear here. Man I sure didn’t think it through hard enough. I sssumed if I just got a hole in the liner it would drain to bilge. Would love to hear from others who have seen the guts of a sceptre. Thanks Kmoose

dginge 04-01-2018 10:48 PM

1 Attachment(s)
Kmoose
Front anchor locker you are referring to?
Plum it to this to be safe ?
Quote:

Originally Posted by kmoose (Post 257135)
Ehhhh, that’s a tough one. I don’t think there is a path unless you can fish a tube down to the area under the front locker.



All times are GMT -4. The time now is 10:37 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft