Seadek Coaming Bolsters
 

I'm looking to install Seadek coaming bolsters on my 23 SF and have a few questions for anyone who may have some experience.

is the material flexible enough to bend along the slight curve (if any) of the cap that i can order straight rectangular pieces? the lead time should be a lot less if this is the case.

i called seadek to see if they already had a 23 sf templated, but they only had a 25 in their computer. as far as i can tell those should be exactly the same from the aft corners forward but not really sure :confused:. i know i could have an installer template it from scratch but i want to get them installed ASAP.

Yes they will follow a contour. I, briefly, sold the deck material and it is very flexible. The coaming pads are a thin backing same as the deck material with the softer stuff outside. I WILL be getting some for my 18.

would love to see finished look if you do it.

Really??? They don't have the Potter 23' template ready to go? Strange!

They should have a template. I had them use my boat as the template back in 2007. They keep thinking it's a 25 due to my bracket.
After 12 years the bolsters are still in decent shape.

Pictures?