Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   Birdsall Marine swim platform with Windline 3 step ladder (http://www.classicseacraft.com/community/showthread.php?t=29882)

SnafuFishTeam 04-28-2019 04:11 PM

Birdsall Marine swim platform with Windline 3 step ladder
 
6 Attachment(s)
Birdsall Marine swim platform with Windline 3 step ladder built a few years back when I had my ttop installed. Original cost just under $1,000. Installing a bracket on the boat. Setup for the port side and came off a 77’ 23 SeaCraft CC with original transom cut out. It’s in great shape. Let me know if you have any questions. Located in South Florida. $550.

bigtahuna 05-12-2019 08:14 AM

Could you post the dimensions or pm me with them? I’m interested but would like to see dimensions.
Thanks Dave

SnafuFishTeam 05-12-2019 10:49 PM

3 Attachment(s)
24.5” wide
21 1/8” long
18.5” tall

csnedeke 06-06-2019 10:01 PM

Hi there. I have a 72 23ft CC like yours. I am in search for a swim platform. How did you mount that one. Did you bolt through the transom? I had my transom redone. I can bolt the bottom through, but curious on the upper bar as where it attaches is that read cooler box.

SnafuFishTeam 06-07-2019 11:03 AM

It was through bolted on the bottom and I think 5200 and screws on the top. I had circular access panels on the transom where you could get to all the bolts from the inside of the boat. My boat was all original so you probably have the same setup unless you modified. Worked great but got a full bracket going on the boat now. Let me know if you have any questions. Thanks.


All times are GMT -4. The time now is 09:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft