Classic SeaCraft Community - Replacing Side Mounted Rod Holders

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - Replacing Side Mounted Rod Holders (http://www.classicseacraft.com/community/showthread.php?t=30006)

Bowhunnter0126

07-10-2019 08:30 PM

Replacing Side Mounted Rod Holders

Any suggestions on a manufacturer or DIY product to replace the factory wooden side mounted rod holders on a 23' CC? Any help/ideas appreciated.

Capt Chuck

07-11-2019 08:26 AM

2 Attachment(s)

I used the Taco Spring loaded type mounted to the ribs and Perko SS bendable pole hangers mounted on a piece of PVC board & painted forward for gaffs on one side & deck brush on the other. The 3/4" PVC board gets the forward holders out past the liner rib. Zoom in and you can see that the top holders had an additional piece of PCV to allow the 6' gaff to lay over the forward vent chase.

uncleboo

07-11-2019 09:11 AM

Gucci! ;)

Bowhunnter0126

07-11-2019 12:05 PM

Thanks for the idea Capt. Looks really clean.

ricknewman

07-11-2019 06:02 PM

Hey Capt. Chuck, where did you find the trim along the bottom edge of your cap? I can't seem to find any?

Capt Chuck

07-11-2019 08:42 PM

Quote:

Originally Posted by ricknewman (Post 264361)

Hey Capt. Chuck, where did you find the trim along the bottom edge of your cap? I can't seem to find any?

Barbour Plastics
http://www.barbourcorp.com/rub-rail_rubrail.htmt
It has an 1/8" lip which covers the rough combing edge. Comes Black or white
I stretched it out between 2 trees, sanded and painted with Signature Finish using a 3" roller.

ricknewman

07-12-2019 09:24 AM

trim

Thanks!

jorgeinmiami

07-12-2019 10:56 AM

This is what I'm thinking about for mine

https://www.seadek.com/coaming-bolster-set.html

All times are GMT -4. The time now is 12:12 PM.