Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   ***SOLD***1970 Seacraft 20' SF CC For Sale (http://www.classicseacraft.com/community/showthread.php?t=30098)

Gas Man 09-17-2019 09:23 PM

***SOLD***1970 Seacraft 20' SF CC For Sale
 
10 Attachment(s)
Paypal ID: 304229059R7524059

Boat is SOLD

$2,000

Boat is located in Gainesville, Fla.

This is a five stringer Potter hull and is a great candidate for a restoration project. Most of the systems and accessories on the boat have been removed (including the outboard) as I was close to starting a restoration project myself. I've heard of this layout referred to as a 'stern-rider' with the console more aft than other SF 20's and the helm seat integrated into the splashwell. She was definitely a smooth ride back there and leaves a ton of space in front of the console.

The trailer is a "2016" manufactured by Dolphin Trailers, LLC in Dover, Fla but is a galvanized Performance trailer frame that had all other components rebuilt. It is in very good shape.

I purchased this boat in 2004 and have enjoyed many hours of fishing her along Florida's Gulf Coast. In 2012 I purchased a Dorado 23 and 'retired' the Seacraft to my parents' lakehouse for bass fishing duty and the occasional tubing for the nephews. The lakehouse was sold in 2016 and I moved the boat through multiple storage facilities over the past few years in anticipation of ultimately restoring it for my family's use. Reality has finally set in for me and I have determined that we don't have the time or resources to tackle the project so I am finally going to let her go.

Gas tank is ~55 gallons

Integrated spray rails

Bennett trim tabs (tabs are mounted to transom but the motor/pump and hydraulic lines were removedÂ…all are in working order and are included in the sale)

True thru-hull transducer installed with Furuno connection (I have never seen a boat/transducer/bottom machine hold bottom and read as well as this boat does at cruising speed and I have found countless new grouper numbers as a result)


Items for potential inclusion as part of a negotiated deal include the following:
  • VHF radio and Shakespeare 8' antenna w mount
  • Furuno FCV-620 bottom machine
  • Anchor, chain and rode
  • Dual-bank Minn-Kota battery charger
  • Lee's small boat outriggers with gunnel mount bases
  • Miscellaneous electrical system components like battery switches, cockpit and bow lights, etc
  • Steering wheel and older Hynautic hydraulic steering helm and cylinder


Thank you.


All times are GMT -4. The time now is 06:33 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft