Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   Cleaning AwlGrip white non bottom paint (http://www.classicseacraft.com/community/showthread.php?t=30101)

Vezo, Part II 09-20-2019 02:18 PM

Cleaning AwlGrip white non bottom paint
 
My 1977 Seafari painted Ice Blue hull sides and Oyster White top and bottom sides. Water line is dark with tannins from Hernando Beach canal. Mary Kate’s On/Off hull cleaner not cutting it mixed with small amount of water. Label says for fiberglass only (gel coat?). Not sure if I should go full strength. Any thoughts? TIA

Michael.

NoBones 09-20-2019 09:34 PM

Try Snowbowl....
If that does not cut it muriatic acid...:eek:
Try a small area first on the bottom, just be quick to rinse off with
fresh water, and stay away from any metal... :rolleyes:
I have used the muriatic on the "Bones" with the Fighting Lady Yellow Awlgrip with good results !

When you go to buy it just do not be buying batteries at the same time...
They will think you are making meth ! :eek::p

Capt Chuck 09-21-2019 06:45 AM

Rustaid
Wil also do the trick. Spray on full strength, in just a few minutes ""poof"" all gone. Less than $10 @ Homers, Lowes & Wallyworld.... I've used it for years. Works on sprinkler stains on the sidewalks etc. For us old geezzers, i bet you can gargle with it..

NoBones 09-21-2019 06:59 AM

Quote:

Originally Posted by Capt Chuck (Post 265427)
I've used it for years. Works on sprinkler stains on the sidewalks etc. For us old geezzers, i bet you can gargle with it..

You mean when your dentures are in the glass next to the bathroom sink. :D

Capt Chuck 09-21-2019 07:13 AM

I hear Spidercrabs Meema used it daily in her enema pouch!

Vezo, Part II 09-21-2019 07:46 AM

Thanks guys, I believe On/Off is muriatic acid. Been using it for 25 years on non bottom painted gel coat. Was concerned the AwlGrip would not stand up to it.

Vezo, Part II 09-22-2019 08:44 AM

My neighbor came by last night with what appeared to be a gallon rectangle shaped plastic jug, put a sprayer on it and went to work. Spray, wait, gently rinse. Better than On/Off. Called Rust/EX and he bought it under $10 at Home Depot. Hull came out really nice.

Vezo, Part II

Fr. Frank 09-24-2019 07:47 AM

Quote:

Originally Posted by Vezo, Part II (Post 265430)
Thanks guys, I believe On/Off is muriatic acid. Been using it for 25 years on non bottom painted gel coat. Was concerned the AwlGrip would not stand up to it.

On/Off is a blend of Hydrochloric Acid, Phosphoric Acid, and Oxalic Acid in a neutral suspension. It is MUCH stronger than Muriatic acid.

Use On/Off ONLY while wearing gloves, eye protection, and a respiratory mask of at least R97 rating. The manufacturer, Siloo, on the MSDS recommends using a chemical cartridge respirator while using On/Off in an environment where it may become aerosolized, such as in a breeze or windy conditions.

uncleboo 09-24-2019 10:26 AM

Quote:

Originally Posted by Fr. Frank (Post 265462)
The manufacturer, Siloo, on the MSDS recommends using a chemical cartridge respirator while using On/Off in an environment where it may become aerosolized, such as in a breeze or windy conditions.

Believe them! I thought I was a goner the first time I used it...outside...in a slight breeze.

Old'sCool 09-24-2019 06:31 PM

Quote:

Originally Posted by uncleboo (Post 265464)
Believe them! I thought I was a goner the first time I used it...outside...in a slight breeze.

Same here...takes your breath away


All times are GMT -4. The time now is 12:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft