FS: Aluminum Transom Plate for a 20
 

I have an aluminum plate that fits over the transom on a 20. It covers all four mounting holes on back and just the top two for front and back. It is 30" wide at top tapers a bit toward bottom. Back plate is 18" tall, front plate is 5". it has a gap of 2 7/16th's" that spans over the top of transom. If you need to do your transom, this is NOT a permanent fix, but it did buy me a few more seasons. I have found that most SC transoms vary in thickness so check yours. This was on my boat when it was still a 20" and removed when I raised the transom. I also have 2 stainless steel arms that offers further support/bracing between the transom and the interior portion of the liner across the engine-well. The braces were specifically made for my (at the time) stock 74 20SF.

$100 for all.

I have pictures but don't know how to post them. Text me for pictures.

Ryan 917-991-9911