Classic SeaCraft Community - Ignition wire for for fuel gauge

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - Ignition wire for for fuel gauge (http://www.classicseacraft.com/community/showthread.php?t=30160)

Oldboat

12-08-2019 05:31 PM

Ignition wire for for fuel gauge

Hello looking to put a fuel gauge in from my sender . I have tested gauge and it agrees perfectly with C10 gauge. I need to know what wire from my keys switch if any I can power gauge with so comes on with key. 2019 300 Suzuki .

Thx Keith

FLexpat

12-08-2019 05:56 PM

ABYC calls for purple

Oldboat

12-08-2019 06:13 PM

Thx for that will find it in morning. Keith

thehermit

12-08-2019 08:57 PM

Quote:

Originally Posted by FLexpat (Post 266068)

ABYC calls for purple

Purple

NoBones

12-08-2019 09:35 PM

The wire from the sending unit should be "Pink" ...

Oldboat

12-10-2019 08:53 AM

I did not find a purple but I did find an unused black and grey that run togeather that have 12 volts after key is on. Since I?m not sure if it is safe to use I?m going to just power the gauge off the electronics switch just don?t want to take a chance on it. Thx

NoBones

12-10-2019 08:24 PM

Gray is normally for a Tach..

Oldboat

12-10-2019 09:03 PM

Yea I saw that I just added to electronic switch so I?m good thx again

gofastsandman

12-11-2019 08:26 PM

Quote:

Originally Posted by NoBones (Post 266084)

Gray is normally for a Tach..

Grey is tach.
Purple is ignition hot side.
Pink is fuel send.

Wow, look at me.

All times are GMT -4. The time now is 11:07 AM.