Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   For Sale 23 Seacraft Project (http://www.classicseacraft.com/community/showthread.php?t=30415)

triley128 07-07-2020 08:57 PM

For Sale 23 Seacraft Project
 
10 Attachment(s)
SOLD Selling my 23 Seacraft project boat

Transaction ID: 6NF2043801340184P

What I did so far:
-Cut out casting deck/fwd fishbox
-New professionally done 30” transom
-Remove foam from stringers. Re-foam and raise 1.25”. Glass over with 2 layers 1708 with epoxy. Plan was to add 3/4” coosa deck making new height just over 2” after glass. I didn’t get to that last part.

What comes with it:
-Cut out from casting deck/fwd fishbox
-Never been wet duel axle trailer
-New Stoner Boatworks bracket (not mounted)
-New Stoner Boatworks console (not mounted)
-New 102 gallon aluminum tank

Location: St. Augustine, FL
Price: $10,000

Attachment 21829

Attachment 21830

Attachment 21831

Attachment 21832

Attachment 21833

Attachment 21834

BOAT IS SOLD

TBubrick 07-08-2020 09:47 AM

is the transom enclosed or is there still the notch?
write up says newly rebuilt 30 Inch

triley128 07-08-2020 09:52 AM

It's a new transom, raised to 30" height, notched. I was going to enclose it, hence why I have a new unattached bracket.

SeaPlusPlus 07-08-2020 02:11 PM

If you're willing to part out the bracket and the tank I'd be interested in those.

KNZ911 07-08-2020 03:30 PM

What are the dimensions of the console? Interested if willing to split.

DonV 07-08-2020 07:38 PM

Deal!!!!!

triley128 07-09-2020 06:54 AM

I responded to your PM SeaPlusplus

triley128 07-09-2020 06:57 AM

Knz the console dims as follows:
52” long
48.5 tall
31.5 wide

No flange on the console. I was planning to glass it in

Blackfin26 07-09-2020 09:21 AM

Is that 30" transom cut out for twin motors?

triley128 07-11-2020 04:14 PM

Quote:

Originally Posted by Blackfin26 (Post 268428)
Is that 30" transom cut out for twin motors?

It’s pretty wide yea


All times are GMT -4. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft