Splash well on '86 20SF
 

I have a 1986 20SF with a newly installed Suzuki DF140A. The lines coming from the motor are not happy with the panel on the deck side of the splash well when the motor is trimmed up. How do other '86 20SF address this panel on the deck side of the splash well?

I didn’t like the way my cables had that question mark loop especially when tilted. I had to flip it over the splashwell which was only 10”. I swapped from starboard to port side routing and flipped the hydraulic hoses after looking at Squidlips...again. These are the things I had in mind for the details page. Function over flash. Cables have a smoother loop now.