Closing up scuppers
 

Looking forward to glassing in the original rear scuppers. Mine are the ones that go straight down and exit under the hull. Last weekend I saw that without the 2 plugs I would have water coming up and onto the deck.

I kinda knew this was a possibility and did not think about during the build...messed that one up.

So once glasses in where would I route the water to exit the boat.
I've heard straight back others cross the tubes to opposite side of the boat.

Not that I'm looking forward to cutting up the deck but .....maybe

If you did not raise your deck during the rebuild you’re probably going to have to cross them but you can try straight out the back first. Been covered in zillion times on the website

Strick