Thread: Honda or Ficht?
View Single Post
  #12  
Old 06-04-2003, 11:06 AM
Rich Rich is offline
Senior Member
 
Join Date: Mar 2002
Location: Cape Cod
Posts: 622
Default Re: Honda or Ficht?

Just dug this up off Suzuki's website. This is the first time I've seen numbers on the big four strokes. Looks like they weigh in just under 600 lbs.

source = http://www.media.suzuki.com/marine/press04/pr_1.html pick on the technical specs link.

SUZUKI V6 4-STROKE OUTBOARDS TECHNICAL SPECIFICATIONS

Engine Type

55-degree V6 DOHC 24 valves


Maximum Output

200 HP (DF200); 225 HP (DF225); 250 HP (DF250)


Fuel Delivery

Multi-Point Sequential Electronic Fuel Injection


Displacement

3.6 liters (220.5 cubic inches)


Bore X Stroke

3.74 inches X 3.35 inches (95mm X 85mm)


Cam Drive

Two-stage, oil-bathed chain driven valve train with automatic hydraulic tensioners


Operating Range

5000-6000 rpm (DF200)




5000-6000 rpm (DF225)




5500-6100 rpm (DF250)


Idle Speed

650 rpm


Shaft Length

XL: 25" XXL: 30"


Counter Rotation

Available on all models, XL and XXL


Weight

XL: 580 lbs. XXL: 591 lbs


Oil Capacity

7.6 qts.


Ignition System

Fully transistorized direct ignition


Alternator

12V 54A


Gear Ratio

2.29:1


Propeller

Stainless steel, 16-inch diameter

[ June 04, 2003, 10:43 AM: Message edited by: Rich ]
__________________
Cape Marine Supply
Reply With Quote