Re: Transom Height
I went from 25" to 30" when I repowered my '76 SF 23 in 80. I went from a single 200 hp w/25" to dual 140's with 25". It was a combination of oak,cut and fitted across the transom, and aluminum plate bolted through the transom. The aluminum overlapped sides about 5" and the bottom about 10". The fellow that did it was a real craftsman and 23 years later, it is still intact. I am in the process of going back to the 25" with a single 225 Yammy. Goo luck and tight lines....Animal Chris
|