Re: electronics boxes
HA MARK
I AM JUST FINISHING UP MAKING ONE OUT OF MARINE PLYWOOD 3/8” WITH EPOXY FILLER & PAINT I MADE MINE 30” X 18” BY 7 ˝” HIGH I ONLY WILL USE IF FOR A DRY BOX NOT FOR ELECTRONICS. I ALSO DIDN’T WANT IT TO BE TO LOW FROM THE BRACKET ON THE T-TOP I LIKE TO SEE THE SKY AND THE OCEAN. MOST OF THE BOXED HINDER MY VISION. I HAVE SEEN SOME STORE BOUGHT BOXED IN SOME OF THE MARINE HARDWARE PLACES FOR ABOUT $250 TO $400 RANGE. I HAD SOME LEFT OVER MATERIALS FROM MY RE BUILD JOB AND DECIDED TO DO MY OWN. IT WAS A LITTLE HARDER TO DO THAN I FIRST THOUGHT BECAUSE OF WORKING IN THE INSIDE OF THE BOX SINCE IT WAS SO SHORT. THE BONDING FILLING AND SANDING AND PAINTING PROCESS IN THE INSIDE SAW A TEST OF PATIENCE FOR ME.
FELLOW-SHIP [img]images/icons/cool.gif[/img]
|