Re: Best Non skid Deck Paint?
I agree w/ Ed. I did a non-skid w/ gelcoat and Awlgrip's (US Paint) non-skid ' particle mix '. It worked great. Not to mention you can make it just about any color you want.
A couple of notes here. When you roll the resin on w/ a roller - don't go too thick. Typically, you add the non-skid particles to the cup of resin before applying the resin to the non-skid area. If the resin is rolled on too thick, these gritty particles may settle too 'low ', via gravity, in the applied resin lay-up, therefore not exposing enough grit for a nonskid surface.
Instead, do two thin layers. Make sure you mix the container holding the resin and grit often to assure that the grit does not settle to the bottom of the container.
You can also use a sugar /salt shaker to apply the coarse particles to the wetted out area.
Hope this helps...
|