Thats mine.. i removed my foredeck with a skill saw. i cut it just forward of the slope on the deck. I preserved the glass and ground out the bad wood and replaced it. but don't make the same mistake I did. the deck is curved or crowned. I glassed in the new wood and then couldn't get the deck to lay back down into place. i had to take it off and cut lines into the wood to get it to bend enough to screw it back down to the hull. Then glass from inside the cabin to re-seal the wood. Stupid mistake- I should have known better. There are a couple of pics in the album but i lost about 50 pics of that process due to my camera being stolen.
http://www.theboatzone.com/gallery/album06