Re: Tabman in Miami
Tom recommended the M120's to me too.
Here is an example of their versility. My boat will have twin outboards on a bracket. If I measure 8in over from the center line of the motor, and from that point to the chine I have 15in. Now the M120's are 10in wide. I can place the tab 9in from motor center and have 4in of setback from the chine.
This falls right into the Bennett spec's listed on the website for setbacks. With a 12in wide tab, it would have ben pushing the limits.
I 2nd the nomanation for Tom for Marine OEM Rep of the year!
|