View Single Post
  #3  
Old 03-01-2004, 12:03 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Powdercoating an older Elec. Box

I sanded mine down then used a aluminum two part procedure to clean and strip it then primed it and painted with a two part epoxy and it still was not good enough I got a few bubbles in the corners that had the heavies corrosion. If I were you I would first sand then that aluminum cleaner stripper then put one or two coat of epoxy on it then sand smooth then primer and paint.
FellowShip [img]/images/graemlins/crazy.gif[/img]
Reply With Quote