Re: Loose center console
Ha Bottomline
The center consol was screwed with sheet metal screws into the deck through little 3” x 3” plywood blocks approx ½ thick (lamination). Over time the wood rots and with the added pressure of the t-top swinging back and forth the rotted wood can no longer support the C.C. and the T-Top. My approach is always “When In Doubt Cut It Out”. I would remove the C.C. and T-Top then remove the top layer of glass replace the deck lamination (I would only use Plywood in that area) and then replace the top layer of deck glass.
FellowShip [img]/images/graemlins/frown.gif[/img]
|