[gw204]

Before I had my T-Top installed, I remounted my console.

Prior to pulling it up I drilled out the mouting holes to accept. no. 12 stainless machine screws. The screws that came out were no. 10s and some of the holes were stripped. I pulled up the console and cleaned all of the old silicon sealer from the console base and deck. When I set the console back down, I bed it in a thick bead of 4200. I put a nice finishing washer on each new screw and sealed them with 2400 as well. Then I ran a bead of 4200 around the base and smoothed it out for a nice finished look. That thing ain't never movin'...unless I really, really, really want it to!!!! [img]/images/graemlins/smile.gif[/img]