[thedink9]

Big Shrimpin

I rebuilt my floor just as fellowship stated. I used 5/8 plywood where the console and leaning post bolted into and corecell everywhere else. I also redid my hatches with corecell. I figure I have lightened the boat over a hundred pounds and the hatches are as rigid as ever. I didn't do the transom yet but would probably use coosa board, as the samples I received look good are dense and come in 1 1/2" thickness which would eliminate a few steps of glassing. The stuff is very expensive though, probable $45o -500 for the job.
Dink