[Sleeto]

I have been thinking about this venting problem for a while and believe this is the best solution: Put a clamshell type vent on either side of the console, intake facing forward and exhaust facing aft. Put an electric blower on the exhaust side and run the ducts thru the top of the hatch over the fuel tank, inside the console. This puts the vents in the middle of the tank area and puts the clamshells in a place high enough to reach air (I do not have room on the aft deck).

My only concern is whether this will allow salt spray to get into the top of the tank and accelerate tank corrosion. The tank on my boat is ok, I guess because the boat was a fresh water boat that was trailered and kept inside.