Re: deck repair
Happiness
Glad to hear the wood around the console was sound. I would seal with any good sealent, I used 4200 when I did mine. Just be sure to inject both into the hole and the threads.
Regarding the aft deck, sounds like if you can find a transition point on the deck from textured to smooth, cut along that and you may be able to get away with less than 1 sheet of plywood, some 6 oz mat and a gallon of epoxy and some filler. I would then roll some new getcoat overthe work and your done for a while. It will get you through a few years of use before you tackle a much larger job. Good luck. Dink
|