View Single Post
  #5  
Old 04-22-2005, 07:02 AM
RS RS is offline
Senior Member
 
Join Date: Jul 2003
Location: Narragansett Bay, RI
Posts: 399
Default Re: Drill oversize holes- fill with epoxy - how

I'd whet out the inside first with unthickened epoxy using anyting handy (q-tip, small brush, etc.)
Then use a meat infusor to inject the cabosil mix from the back of the hole forward, withdrawing the needle as you finish injecting. The infusor looks like a big hypodermic syringe with a plastic needle. They are about $4 at X-marts.

Tape over the hole until it first sets. You can use a putty knife to scrape it level while it's a little soft.
__________________
Best regards,
Roger

http://members.cox.net/rhstg44/Misc/...go%20small.jpg
1979, 20' Master Angler
Reply With Quote