Re: SPRAY RAILS
Jim, Teak is the only way to go. On my 20 It has two pieces
laminated together. From the bow to about mid section.
Teak can be formed by soaking in a PVC tube with amonia in
it for about two days. When you take it out of the tube it is like rubber. Then form the first piece to the hull, and
screw the second piece on top of that. The only down side is you have to oil the teak about every third time you use the boat. It sure makes for a drier ride and softens the entry on every wave. Good luck. Ken
__________________
See ya, Ken ©
|