Re: Hull Flex ?
I sorry I thought I replied to this. It's most likely in the wrong thread. Yes on the large screws that the factory used to hold the deck to the hull I used ss fender type washers and Nyloc nuts.Where I could get to it. In a walkaround it's hard to reach all of them. But int the srews for the rubrail, I wasn't concirned as much. With the holes filled with glass and apoxy I just used the same screws that were good and bought some to replace the bad ones. The large screws were about every six or eight inches and would keep the deck from working on the hull.
The main point is the beefed up bulkhead.
|