Re: \"glue and screw\" question
I used Coosa board and stiffened the glue job with a tee made out of 2 x 6's while is set to keep the transom flat. I used through bolts wherever there was an existing hole ( there were 52 holes in the transom). The bolts came out no problem. Be sure to keep the transom flat and check before dimensions on the transom so the deck cap fits back on.
I posted pictures on another transom job rebuilt post. Finished the job in July and I am very happy with the result with Coosa board, epoxy and biaxial cloth.
__________________
73 23 SF 2004 200 HP Yami OX66 Best boat I owned!
2002 29 Seavee twin 200 yami's
|