Re: Livewell ideas.. Sceptre
GoingBig,
Are you talking about the floor livewell? If so, you'll need to drill both an overflow drain and raw water inlet up near the top. The existing drain in the center doesn't have much clearance between the bottom of the fitting and the hull, so you have to use a 90-degree elbow. Also, the drain is not countersunk, so the well never truly drains all the way.
If your Sceptre also has the 2 coolers/fishboxes under the seats, again you're in the same sitaution as the floor well. However, the seat boxes are square and not normally recommended for livewell duty since the bait will get trapped in the corners and die faster.
|