[oldbluesplayer]

the current, existing thru hulls are not the same size - inlet is a 3/4 (I think) and the outlet is 1-1/4 or 1-1/2 ??

so that keeps that solution out of play.

I'm thinking short stubs of tube, 3 or 4 inches working length, insert a plug in one end, double clamp that, and double clamp to the thru hull.

see the seperate post on stripping the old bottom paint - I would also want to wait on just glassing over the thru hulls till I get the paint stripped off the bottom.

was hoping there was a thru hull filler out there someone knew of - a thru hull shaped piece with no hole, meant just for this occasion.

Bill