View Single Post
  #2  
Old 03-15-2006, 09:42 PM
GradySailfish GradySailfish is offline
Senior Member
 
Join Date: May 2005
Posts: 167
Default Re: Cetol Marine Gloss

I like the gloss look. Apply not two but three coats sanding in between with 320-400 grit sandpaper.

If you can take the pieces off and lay them flat, apply thick coats of cetol, the finish will look awesome. If you can and must apply on vertical surfaces, make sure you apply thin coats.
__________________
2002 26 Fortier Yanmar 250 6LP-DTE
1978 20 Sea Craft Master Angler 08' 150 ETEC
Reply With Quote