[Miles Offshore]

I use a method that to me works better than the bleeder valves. I unscrew the fill cap and put the nylon adaptor with a piece of a quart of fliud in it and get someone to hold it upside down. Turn the steering wheel back and forth for a few minutes and after a little while all the air comes back up through and out the fluid in the bottle. A friend showed me this method last summer and believe me , it is a hell of a lot easier than messing with the bleeder valves. After the air is all out just remov3e the fitting and replace the fill cap. it will be full and you might have to remove just a tad. Just another way- craig