Re: 74 Seacraft Tsunami
Scott,
Man... Two posts in two days!!! Someone actually read my thread. I though for sure I was the outcast of the site due to all of the alterations I am making to the Tsunami.
Scott, The primer brand was TEMPO. I used in on an old alum. outdrive in the past it was good stuff. Therefore I used it again. The top coat is a glossy black two part epoxy from Fiberglass Coatings. Not too sure of the brand, but it sure stuck well to the primer.
As for the glass.... Well, I'm not sure if my Boat windows were Originals. Pretty sure the four front side windows (excluding the fold out window) were originals as they were heavy safety glass. The others were plexi. The glass ones popped right out after removing the friction fit gaskets. The plexi came out easy but in 20 pieces. New gasket material was ordered from American (60.cents a ft)+ shipping.
Oh yeah, I used a soft brass wire wheel to remove the old paint. I would recommend anyone doing this make sure to cover anything that they don't want stained black. I am redoing my top cap anyway so I just let it fly.
Best of luck, Jason
|