Re: Where to get a good deal on Coosa in Ma
I looked for a while myself this past spring and couldn't find one. I called Coosa and they told me the closest place was on Long Island (NY). Talked to that distributor and he said yes, he was the closest to Boston. Per sheet price wasn't too bad, but shipping was a killer. Ended up going with Penkse Board after talking to a builder of a popular, contemporary hull in my area that uses the stuff.
BTW, Coosa sent me a couple of 1 foot square samples that I cut up and tested with epoxy, etc. I tried fitting them into the gap left by the 1-1/2" ply transom makeup that my SeaCraft had. The Coosa didn't fit. I measured it and found that it is actually 20mm thick, not 18mm (3/4"). That's a huge difference and, in my case, I never could have fit two layers of 3/4" Coosa Board into the perimeter gap on the transom of my boat.
|