Re: rub rail installlation
My original rubrail looks like it was held on ABOUT every 7 inches. It varies from 6.5 to 7.5 spacing. I used through-bolts to hold the rubrail itself on (all stainless w/ nyloc nuts). It took a long time, about 25 man hours, but this was an aluminum rubrail w/ rubber facia which required I drill each hole in the rubrail as I went.
__________________
72 SeaCraft 20' CC | 2.5L Alpha One |"Two Dogs"
65 StarCraft 21' Alum. CC
|