Things are coming along pretty good, got ALL the wood out,ground out the the inside where holes were to glass them over from the inside, one piece of plywood cut gonna glass in all the holes this afternoon and if the weather will let me the new transom will be going in tomorrow.
My plans are to cut notches in the wood where the drain hole is and where transducers will be mounted and filling them with glass so water intrusion will be almost impossible.
I would post the pics on here but I am sure the moderators wouldn't like that much bandwidth.
http://www.myfishingpictures.com/sho...t=1&thecat=500
http://www.myfishingpictures.com/sho...t=1&thecat=500
http://www.myfishingpictures.com/sho...t=1&thecat=500
http://www.myfishingpictures.com/sho...t=1&thecat=500
http://www.myfishingpictures.com/sho...t=1&thecat=500
http://www.myfishingpictures.com/sho...t=1&thecat=500