[gigolot]

Bait well/storage hatch. Im probably gonna put a piece of clear plexiglass where the vent scoop was over the bait well and rod holders where the two outer vents were. After more scientific mathmatical equasions, it looks like the bolds to hold the bracket on will be in side this area and not below it. So when I order the bracket I will have to see if they can give me carriage bolts instead of hexhead bolts. Thats not snow on the ground, Had to remove the wet balsa wood from the gunnel cap at the transom and grind it out to prepare for new wood, then I figured while I was all glassed up I might as finish leveling the transom. So now hopefully all the major grinding/sanding is done for this step of the project except filling in divits that I ground on the transom where previous holes were.