Re: My SF 18 ....... Pics at last!
Cap'n Chuck, I absolve you in nomine Patri, et Filius, et Spiritu Sancti.
Darlene, another way, besides using the hand pump, is to drill a 3/4" drain hole, mix up a tiny bit of resin to seal the fibers at the edge of the hole, and then stick a live-well plug in it. When the boat's out of the water, just pull the plug and drain it into the bilge. I did this for a friend in a 17' Cruise Boat CC back in the mid 80's. It worked great. He used the little locker to keep his snorkeling gear in.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.
Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!
Currently without a SeaCraft 
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
|