Re: Motor Length / Transom Length
You're good. Your cavitation plate width is about 5"-6", and the outside edge of the cavitation plate should be level or a half-inch above the bottom of the boat roughly 2 1/2" outside of the centerline, or in a vertical line from the edge of the cavitation plate. Give me a little bit and I'll make a very rough graphic of what I mean.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.
Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!
Currently without a SeaCraft 
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
|