View Single Post
  #3  
Old 06-11-2007, 11:49 PM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default Re: Driving with full bracket

Don Herman installed my motor per the 1"/1' of setback formula. I have since been able to raise motor 2 holes with no handling/ventilation problems; can put helm full over at 25-30 mph, no problems. Boat will tend to porpoise if motor is trimmed too high, probably due to extra weight further aft. I do have to trim it lower after raising motor but I expected that. In general I do notice the power trim has much more effect on running angle on this 25" motor/bracket setup than the old 20" motor/transom setup; added a Doelfin which makes that effect even more pronounced which I believe is a good thing. Can plane at 12-13 mph and ride comfortably when it gets rough.
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg
Reply With Quote