[Snookerd]

deck is solid, transom is solid. One spot on the deck (in front of the console) that has some cracks in the glass. I never fixed it since 01 and it has not deteriorated. The original deck attached bow running light was removed for the hull type "eye" running lights. The old place on the deck where the running light was not glassed over, and has recently worn thru to show the circle cut from the factory(1.5 inch opening). Compression was done last Summer. All cylinders were good. The lower unit on the motor is missing about an inch of metal around where the prop housing starts(electrolisis from a welded lower unit) Trim tilt has always had a leak. Motor starts right up