Re: Inboard Experts
Hello,
I put in a new motor 2 years ago and went with marine power, it seemed lke the best set-up, with the heat exchanger in front of the motor, 350/315 HP and a 1.5-1 velvet drive.
The old motor was right hand turn trans and wheel (1.5-1 trans). I also went with a carb motor since I can fix it (I hope). I had 4" extension put in, the old motor had them and I looked at Craig's and his had them and a couple friends SEAVEE's also had them and glad I did. The owners manual indicated that water intrusion would void any help from them. I have a 17/16 prop and turn up 4600 RPM's, at 3100 RPM's I run about 26-27 MPH at 10.4 gallons per hour.
My brother has had several go fast boat with twin or triple motors and when he had a problem the compter woud try to compensate until he had a good problem.
__________________
GARY
76 SEACRAFT CC INBOARD
|