[65Bowrider]

With a blank canvas to work with, it's easy to get carried away, but need to stay with reality & our abilities.

The weep holes in the Coosa Board were recommendations by Dan at Fiberglass1, and then talking with the Coosa Board tech people, they confirmed. It's a great way to make sure you get all the airpockets out for a good solid bond.

The clamping method and then shimming tight worked very well, to squeeze it tight enough to see the cabosil ooze out, without over-tightening as you don't want to squeeze out too much and loose your good bond.

Been out of town lately, & hopefully will get back to working on her today.