[billythekid]

Well here we go I got alot done last week and I still had to work a 57 hour week. Alot of late hours were put in. I started with the console rigging while it was still out of the boat. I drilled and screwed the wire looms in place before I started any wiring. I have watched many boat builders do this over the years and it still makes the neatest job. After the panduit clamps were in place it was time to mount and rig the electronics,gauges,battery switch, washdown,water seperator. I also roughed in the battery cables for later.












here are some of the wires all loomed up waiting for the console to be installed.





This is where it made me feel like I was making some progress. The inside liner was painted awlgrip snow white. then deck and hatches were taped off and sanded 120. The decks were painted with a contrast color awlgrip Moondust. It took about 3 hours too tape the deck off. I am not the best at taping, but I was happy with the way it came out.













This was a special touch that I added for someone who has put up with me while the rebuild took place





I would have the outside sprayed but awlgrip mislabeled thier paint so tuesday. otherwise the console is going into tomorrow.
till next time