Thread: porta bracket
View Single Post
  #4  
Old 11-13-2008, 07:54 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: porta bracket

If you go with the porta-bracket, make sure you close the deck drains, and just use bilge pumps. Otherwise at rest you'll have a couple of inches of water on the aft deck. I agree with the recommendation for flotation bracket. The Seafari was designed for a maximum engine weight of 325 lbs, which was the max weight of an inline 6 Mercury including trim system. The design was not later modified to accept V6 motors in '76-'77. The assumption was based on a recommended OEM power of 90-140 hp.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote