Maybe you can help me....
I have a lowrance 111XC that I have hooked up to my etec outboard via the Lowrance-net NMEA2000 interface. It is connected on one of 3 Ts I have in my system. One goes to the head unit, 1 to my GPS, and the third to the Etec. I have 120ohm terminations on each side. The GPS is working fine. I have updated the software in the head unit, and also the etec. I am not running i-command gauges (just a standard tach).
With all that said, I still can not see the motor on the bus set up screen.
Is there something I am missing here?
I assume the buss is correct since the GPS works. I would think that it would see the motor and add it to the list, but I have to be doing something wrong.
|