[lonesurfer87]

I removed the front hatches and removed all balsa coring and recored with divinycel and galss onel layer between the divinyceland one layer on other side of divinycel. Hatch is very strong. I also have been laying down some fairing putty on whole boat as well as the console. The fuel tank hatch is glassed down. That was made out of penske board (same as coosa) with a layer of 1708 glass on either side. The hatch was unbelievably light and strong.

fuel hatch glassed down with epoxy resin and 1708 glass.


Hatches with all balsa coring removed.




Divinycel coring being applied to hatch.